Add-On Code - Sharp ER-A410 Instruction Manual

EAN-13
• Ordinary EAN-13 code (used in the source marking)
• Specific EAN-13 code (flag 977, 978, 979) (used in the source
marking: ISBM, ISSN)
For entry, you must enter a full of 13 digits number.
• Internal code (used in the in-store marking, the flag character
number: 20 through 29 and 02)
Program the format by the job# 2025.

Add-on code

UPC-A and EAN-13 may be followed by a two digits number or a five digits number as add-on code, excepting
UPC-A without a check digit plus two or five digits add-on code.
Therefore, the total number of digits enterable for sales entries are as shown below:
Code entry
UPC-A
UPC-A w/leading zero
UPC-A w/o check digit
UPC-E
EAN-8
EAN-13
Your register automatically judges the add-on code in an UPC/EAN code entered from the total
Note
number of digits and the flag.
156
No add-on code 2-digit add-on code
12
13
11
6
8
13
Maker code
Nation code
Flag (Free format)
02, 20-29 Program the format by the job #2025.
5-digit add-on code
14 17
15 18
–
–
–
15 18
C
D
Item code
C
D
–
–
–