Price Change Function (For Upcs) - Sharp ER-A410 Instruction Manual

Price change function (for UPCs)

You can use this function when you need to change the unit price or associated department of a UPC item in
REG/MGR mode.
There are two methods for price changes:
1. Price change mode
You can change the preset price and/or the associated department of a UPC item without entering PGM
mode.
2. Changing a price during a transaction
When a wrong UPC price and/or associated department is found during transaction, you can correct them at
the time of the transaction. With the entry of a new price and/or associated department, the preset price
and/or associated department is automatically changed to the new price and/or associated department.
For the Non-PLU type price embedded UPC-A codes and press codes, the prices in the codes
Note
have the priority over the preset prices. So, for these codes, a changed price is valid only when the
price change is executed.
Procedure
Price change mode
"PRICE CHANGE" is displayed.
Scan UPC code
Ê
UPC code
Changing a price during a transaction
Scan UPC code
Ä
UPC code
To enter 0
Unit price
c
To cancel
Ä
PLU/
UPC
Ê
PLU/
UPC
Ê
Department key
å
"PRICE & DEPT" is displayed.
à
Dept no.
To change the unit price only
To change the associated dept.
directly by depressing the
corresponding key
To change the associated dept.
using the dept. no. entry key
35