Cashier Report - Sharp ER-A410 Instruction Manual

Cashier report

Using this function, you can take X and Z reports for individual cashiers or all cashiers.
Individual cashier reading and resetting
The OP X/Z-mode reading and resetting is allowed only when your machine has been programmed
Note
for "OP X/Z mode available" in the PGM2 mode.
• Sample X report • Sample Z report
Cashier no.
Cashier name
Sales total
The subsequent printout occurs in the
Customer counter
same format as in the sample X report.
* When you take these reports in the OP X/Z mode,
the X report shows an "OP X" and the Z report
shows an "OP Z".
Commission 1 sales total
Commission 1 amount
(commission 1 sales
total x commission 1 rate)
Commission amount total
Non-commission sales
total
163