Link Plu/Upc Link (#2220); Programming Of Plu Levels And Direct Plu Keys (#2219) - Sharp ER-A410 Instruction Manual

Link PLU/UPC link
Procedure
. @
2220
PLU/UPC codes must have already been defined.
Note
You can program a maximum of 15 link PLUs/UPCs. A link PLU/UPC can be linked to a maximum
of 5 PLUs.
Example
Programming so that PLU 25, 26 and 27 are linked to PLU 21
Programming of PLU levels and direct PLU keys
You can assign PLU codes to fixed keys in each PLU level and use those keys as direct PLU key.
For assigning a PLU level, press the
no. 1 to a PLU code, press the
For key no. position, refer to section "3 Standard key number layout" in chapter "KEYBOARD".
Procedure
@
.
2219
The key number placement is determined by your local Authorized SHARP Dealer.
Note
Example
Programming of PLU 1 (level 1) and PLU 65 (level 2) are assigned to key no. 21
2220
PGM 2
To program any PLU/UPC
Ä
@
PLU code
(max. 5 digits)
UPC code
(6 to 13 digits)
Key operation
. @
2220
@ t
21 25
t
26
t
27
Ç
l ¬ Ò
, or key. For example, if you want to assign PLU level 1 and key
l
key and enter 1 before entering the PLU code.
To program any key no.
l
¬
Key no.
(max. 3 digits)
Ò
To keep the current level
Key operation
. @
2219
l @ t
21 1
¬ @ t
21 65
Ç
Cancellation t
To repeat up to 5 times
t
Linked PLU code
(max. 5 digits)
To program for the following PLU/UPC
Print
PGM 2
Cancellation
@
PLU code
(max. 5 digits)
To program the next sequential key no.
Print
Key no.
Ç
t
Linked
PLUs
2219
t Ç
107