Job-Code-Based Programming; Setting The Date And Time; Setting The Date (#2610); Setting The Time (#2611) - Sharp ER-A410 Instruction Manual
Sony cash register user manual
Hide thumbs
Also See for ER-A410:
- Instruction manual (190 pages) ,
- Programming manual (53 pages) ,
- Service manual (33 pages)
Table of Contents
Advertisement
Job-Code-Based Programming
This section illustrates how to program items using job codes. Using job codes allows you to program a wide
variety of items in comparison with direct programming.
Start this programming by entering a corresponding job code as shown below.
.
@
2110
All the items which can be programmed by the job-code-based programming are listed on this page and the
following, and those which can also be programmed by the direct programming are marked with the symbol
"
Direct
" that follows job codes.
Setting the date and time
1
Setting the date
Enter the month (one or two digits), day (two digits), and year (four digits: 2000 – 2099) in this sequence.
Procedure
.
@
2610
Example
Setting the time
Set the time using the military time (24-hour) system. For example, when the time is set to 2:30 AM, enter 230;
and when it is set to 2:30 PM, enter 1430. The time is printed and displayed on the real time system.
Procedure
.
@
2611
Example
PGM 2
2610
Direct
Date (seven or eight digits)
Key operation
. @
2610
Ç
08262004
PGM 2
2611
Direct
Time (max. four digits)
Key operation
. @
2611
Ç
1430
Ç
Print
Date
Ç
Print
Time
81
Advertisement
Table of Contents
