Programming The Parameter Of The Slip Printer (#2615); Setting The Time Limit For The Till Timer - Sharp ER-A410 Instruction Manual

Programming the parameter of the slip printer
Procedure
.
2615
* AB: Initial slip feed line (0 to 64)
CD: Slip print max. line no. (0 to 99)
E: Validation printing counter (1 thru 9 times)
To inhibit validation printing, enter 0.
F: Feed lines after printing of a tray subtotal (0 thru 9 lines)
Example
Entering 009910 to ABCDEF

Setting the time limit for THE TILL TIMER

The machine counts the number of times the drawer is left open for longer than a programmed time limit. The
counter will be incremented by one each time a programmed time limit is reached. The time limit for THE TILL
TIMER TM can be preset for 0 to 255 seconds. The count is printed on the general report and cashier report.
Procedure
.
2617
Example
Setting the time limit as 30 (seconds).
128
When A thru F are zeroes
@
* A B CD E F
Key operation
. @
2615
a
009910
To program 0
@ Time limit
1 to 255 seconds
Key operation
. @
2617
a
30
PGM 2
a
Print
TM
2617
PGM 2
a
Print
2615