Reading (X) And Resetting (Z) Of Sales Totals; How To Take A X1/Z1 Or X2/Z2 Report; Flash Report - Sharp XE-A207W Full Detailed Instruction Manual
Hide thumbs
Also See for XE-A207W:
- Full detailed instruction manual (134 pages) ,
- Instruction manual (134 pages) ,
- Basic user manual (4 pages)
Table of Contents
Advertisement
8
Reading (X) and Resetting (Z)
of Sales Totals
• Use the reading function (X) when you need to take the reading of sales information entered
after the last resetting. You can take this reading any number of times. It does not affect the
register's memory.
• Use the resetting function (Z) when you need to clear the register's memory. Resetting prints all
sales information and clears the entire memory except for the GT1 through GT3, reset count,
and consecutive number.
• X1 and Z1 reports show daily sales information. You can take these reports in the X1/Z1 mode.
• X2 and Z2 reports show periodic (monthly) consolidation information. You can take these
reports in the X2/Z2 mode.
• In the OP X/Z mode, an clerk can take his or her report.
• If you want to stop the printing report, press the
■ How to take a X1/Z1 or X2/Z2 report
[To take an X1 or X2 report:]
1.
Press the
j
2.
Select the "4 X1/Z1 MODE" or "5 X2/Z2 MODE" by using the
3.
Select "2 READING" in the X1/Z1 mode or select "1 READING" in the X2/Z2 mode menu window to
display the items list.
4.
Select the appropriate report title.
5.
Press the
A
[To take a Z1 or Z2 report:]
1.
Press the
j
2.
Select the "4 X1/Z1 MODE" or "5 X2/Z2 MODE" by using the
3.
Select "3 RESETTING" in the X1/Z1 mode or select "2 RESETTING" in the X2/Z2 mode menu
window to display the items list.
4.
Select the appropriate report title.
5.
Press the
A
■ Flash report
You can take flash reports (display only) in the X1 mode for department sales, cash in drawer (CID) and
sales total at the point you take the report.
1.
Press the
j
2.
Select "1 FLASH READ" in the X1/Z1 mode menu window to display the items list.
3.
Select "DEPT. SALES" to take a flash report of department sales, "CID" to take a flash report of cash
in drawer, or "SALES TOTAL" to take a flash report of sales total.
key.
key.
key.
key.
key.
a
key.
I
key, and press the
I
key, and press the
51
A
key.
A
key.
Advertisement
Table of Contents
