Sharp ER-A410 Instruction Manual page 145

Time out setting for time 2 (response of authorization)
Procedure
.
7114
Time out setting for time 3 (reading of dial in/out)
Procedure
.
7115
Secret codes to control access to the PGM1 mode, X1/Z1 mode and X2/Z2
mode
PGM 2
When a secret code has been set for that specific mode operation, before performing any PGM1 mode, X1/Z1
mode or X2/Z2 mode operation, you must enter a secret code according to the following procedure.
Operating
Procedure
Ç
Secret code
(max. 4 digits)
Once a secret code is entered, it does not need to be entered again unless the mode switch setting
Note
is changed or an operation is performed.
Programming
Procedure
*
2630
. @
2631
2632
* 2630 for the PGM1 mode
2631 for the X1/Z1 mode
2632 for the X2/Z2 mode
Example
Programming secret code 1234 for X1/Z1 mode
To program zero
@
Time out time
(1 – 255 sec)
To program zero
@
Time out time
(1 – 3000 sec)
2630 2631 2632
Ç
To program zero (no code)
Secret code
(max. 4 digits)
Key operation
. @
2631
Ç
1234
Ç
Ç
Ç
Print
143