Cable Diagram; Pin Assignments - Aruba 2930M Installation And Getting Started Manual

Cable diagram

NOTE: Pins 1 and 2 on connector "A" must be wired as a twisted pair to pins 1 and 2 on connector
"B".
Pins 3 and 6 on connector "A" must be wired as a twisted pair to pins 3 and 6 on connector "B".
Pins 4 and 5 on connector "A" must be wired as a twisted pair to pins 4 and 5 on connector "B".
Pins 7 and 8 on connector "A" must be wired as a twisted pair to pins 7 and 8 on connector "B".

Pin assignments

For 1000Base-T operation, all four pairs of wires are used for both transmit and receive.
96 Aruba 2930M Switches