Aruba 2930M Installation And Getting Started Manual page 16

Switch LEDs
Back Module Status
Speed Mode Selected
Power over Ethernet (PoE)
Mode Selected***
User Mode Selected
16
Function
Status of modular
components installed in
the back of the unit.
Indicates when the Port
LEDs are showing port
speed information.
Indicates when the Port
LEDs are showing PoE
status information.
When stacking is
enabled, the Port LEDs
are displaying stack
information and status.
When stacking is
disabled, this mode is
reserved for future use.
State
On Green
Slow Flash Orange*
Off
On
Off
On Green
On Orange
Slow Flash Orange*
Off
On Green
Off
Meaning
Normal operation: All modular
components installed in the
back of the unit are
functioning correctly.
One of the modules inserted
from the back of the chassis
(power supply or stacking
module) has failed self-test or
is experiencing a fault
condition. Flashes
simultaneously with the
Global Status LED flashing
orange.
No modular components
installed in the back of the
chassis.
Speed Mode is selected. Port
LEDs indicate port speed.
Speed mode not selected.
PoE Mode is selected. Port
LEDs show PoE information.
PoE Mode is selected and a
port also has a PoE error. The
Global Status LED and the
LED corresponding to the port
with the error will be flashing
orange. The rest of the Port
LEDs will display normal PoE
status.
PoE Mode has NOT been
selected and a port has a
PoE error. LED will be
flashing orange
simultaneously with the
Global Status LED and the
LED corresponding to the port
with the error. The rest of the
Port LEDs will display normal
PoE status.
PoE mode is not selected.
User Mode is selected.
User mode not selected.
Table Continued
Aruba 2930M Switches