Selecting An Arpeggio Template; Creating An Arpeggio; Using The [-] [+] Buttons And [01]-[16] Buttons To Input Data - Roland JD-XA Parameter Manual

Selecting an Arpeggio Template

1.
Press the [Arpeggio] button.
The arpeggio function turns on, and the ARPEGGIO screen appears.
[Shift]
By holding down the
2. [ K ] [ J ]
Use the Cursor
3.
Use the [-] [+] buttons to select an arpeggio template, and press the
4.
Press the [Exit] button to return to the program select screen.
MEMO
When you select a template, all arpeggio parameters are changed to the values of the template.

Creating an Arpeggio

About arpeggios
An arpeggio contains data in a grid of up to 32 steps by 16 notes, with settings that specify the chord style and how the arpeggio is sounded.
Each grid location contains one of the following items of data.
5 On: Note-on (with velocity data)
5 Tie: Tie (hold the preceding note)
5 Off (Rest): Rest (not sounded)
Based on "the lowest key you press during input,"
Using the [-] [+] Buttons and [01]–[16] Buttons to Input Data
1.
Hold down the [Shift]
The ARPEGGIO screen appears without changing the arpeggio on/off status.
2. [ K ] [ J ]
Use the cursor buttons to select
3. [ K ] [ J ]
Use the cursor buttons to select
4.
Use the cursor and [-] [+]
If data has been input for the specified note number, the
MEMO
You can also use the keyboard to specify the note number and velocity at the same time.
5.
[-] [+]
Use the cursor and
[Arpeggio]
button and pressing the
buttons to select "Select Template,"
the relative key position and order are stored in the arpeggio data.
button and press the [Arpeggio]
"Pattern Edit,"
"End Step,"
buttons to select the note number that you want to input.
[01]–[16]
buttons to specify the velocity that you want to input.
button, you can access the ARPEGGIO screen without turning the function on/off.
and then press the [Enter]
[Enter] button.
button.
and press the [Enter] button.
and specify the number of steps.
button corresponding to each step is lit.
61
button.
Arpeggio