Getting Started - Elcometer CG20 Operating Instructions Manual

3 GETTING STARTED

3.1 FITTING BATTERIES
Your gauge may be used with dry cell batteries or rechargeable
batteries. 2 x LR6 (AA) alkaline batteries are supplied with this gauge.
When the battery voltage is low the entire display will start to flash. When
this occurs the batteries should be replaced.
To fit or replace batteries:
1. Unscrew battery compartment cover.
2. Referring to battery polarity instructions on rear of gauge, insert bat-
teries into gauge ensuring correct polarity.
3. Replace battery compartment cover.
Note: Remove the batteries from the gauge if it is to remain unused for
a long period of time. This will prevent damage to the gauge in the event
of malfunction of the batteries.
Battery
compartment
cover
Model CG20
4