Elcometer CG20 Operating Instructions Manual page 2

This product meets the Electromagnetic Compatibility Directive.
The product is Class A, Group 1 ISM equipment according to CISPR 11.
Group 1 ISM product: A product in which there is intentionally generated and/or used conductively coupled radio-frequency
energy which is necessary for the internal functioning of the equipment itself.
Class A product are suitable for use in all establishments other than domestic and those directly connected to a low voltage
power supply network which supplies buildings used for domestic purposes.
Note : In the close presence of some radio transmitters, erroneous readings may be given. If this occurs tests should be
repeated at another location.
These operating instructions are available for download on our website www.elcometerndt.com.
The following trademarks are registered trademarks of Elcometer Limited, Edge Lane, Manchester, M43 6BU. United
Kingdom:
Material Safety Data Sheets for the ultrasonic couplant supplied with the CG10 & CG20 and available as an accessory, are
available to download via our website:
Elcometer NDT Ultrasonic Couplant Material Safety Data Sheet :
www.elcometerndt.com/images/MSDS/elcometer_ultrasonic_couplant.pdf
Elcometer NDT Ultrasonic Couplant Material Safety Data Sheet :
www.elcometerndt.com/images/MSDS/elcometer_ultrasonic_couplant_hi_temp.pdf
All other trademarks acknowledged. © Elcometer Limited 2011-2012. All rights reserved. No part of this document may be
reproduced, transmitted, transcribed, stored (in a retrieval system or otherwise) or translated into any language, in any form
or by any means (electronic, mechanical, magnetic, optical, manual or otherwise) without the prior written permission of
Elcometer Limited.
TMA-0553 Issue 01
Text with cover: 23730