Aastra 470 System Manual page 171

The licence information can be viewed directly from the communication server us-
ing the Configuration Manager in AMS.
The data stored on the EIM card is not deleted by a first start of the PBX, and re-
mains available.
See also:
"Licences", page 59
Reading out default values
There is a simple method for reading out the country-specific default values:
1. In offline mode on the AMS Shell create a new communication server for the re-
quired sales channel.
2. Log in with the default access data
3. Open Configuration Manager
4. Add the desired hardware in the
5. Add system terminals, mailboxes, direct dialling numbers etc.
6. Most default values can now be read out.
Aastra 470 as of R1.2
syd-0337/1.2 – R1.2 – 11.2011
System configuration.
Configuration
171