Colour Display - Aastra 470 System Manual

6. 4. 4

Colour display

The colour display has different display modes, which depend in part on the Call
Manager's operating mode.
The table below summarises the display modes.
Tab. 98 Operating modes and display priorities
Display mode of the colour
display
Error mode
(Error Mode)
Boot menu
(Boot command mode)
Menu mode
(Application command mode)
Traffic load mode
(Traffic mode)
Idle mode
(Idle mode)
Event message mode
(Event message mode)
Aastra 470 as of R1.2
syd-0337/1.2 – R1.2 – 11.2011
Call Manager
Trigger event and purpose
operating mode
System setup 2 • Triggered by software or hardware error.
• The error is shown on the display.
• The system is unable to run.
System setup 2 • Is shown during the start-up phase 2 (LED pattern 5 in
Tab. 93, page
• Allows the user to reset the IP address data or to carry
out a first start.
Normal operation • Triggered by pressing any navigation key briefly in
the traffic load mode.
• Allows the user to run various advanced functions.
Normal operation • After the startup of the Call Manager or after exiting
the menu, idle or event message mode.
• Shows the current traffic load of the Call Manager.
Normal operation • After a certain amount of time without user interac-
tion from the traffic mode or the event message
mode.
• Screen saver and energy saving function.
Normal operation • After one or more event messages are received.
Operation and Maintenance
196) during approx. 3 seconds.
199