Re-Enabling Intelligent Provisioning; Reinstalling Intelligent Provisioning - HPE ProLiant Gen10 User Manual

• Use Proxy
• DHCP Auto-Configuration—Deselect this option to manually enter DHCP settings, including using
IPv6 protocol.
• Accept EULA
• Provide anonymous usage and error feedback to help improve this product
2. Click Next.
3. Read the EULA, and then select Accept Intelligent Provisioning EULA.
4. Click Next.
5. Enter the following information:
• Automatically optimize your server
NOTE: Required fields differ if you do not select Automatically optimize your server.
• What will this server be used for?
• Enable F10 functionality
Provide anonymous usage and error feedback
• Enable automatic application of software and firmware updates to this system
6. Click Next.
7. Enter the following information:
• Choose network interface for updates and installs
• System Software Update—The source where the server gets updates.
8. To save the changes, click Submit.

Re-enabling Intelligent Provisioning

Procedure
1. Reboot the server and, when prompted, press F9 to access the UEFI System Utilities.
2. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Server Security > Intelligent Provisioning (F10 Prompt), and then press Enter.
3. Select Enabled.

Reinstalling Intelligent Provisioning

NOTE: Changes to the HPE website and the firmware update process will cause firmware updates to
time out for versions below 1.63 (for Gen8) and below 2.50 (for Gen9). The older web sites associated
with hp.com have been retired and Intelligent Provisioning will be unable to find updates.
Older installations can be updated with the Intelligent Provisioning Recovery DVD.
12 F10 mode options