CLI Reference Guide
5
VoIP Commands
5.1
interface
5.1.1
E1/T1, bri
This command enters a specific PSTN interface (E1/T1 or BRI) configuration.
Syntax:
The syntax of this command includes the following variations:
interface bri <slot/port>
interface e1-t1 <slot/port>
set <parameter> <value>
Arguments
<parameter> <value>
Command Modes
Enable
Version 6.4
Sets the following table parameters:
b-ch-negotiation
call-re-rte-mode
defaults
isdn-bits-cc-behavior
isdn-bits-incoming-calls-behavior
isdn-bits-ns-behavior
isdn-bits-ns-extension-behavior
isdn-bits-outgoing-calls-behavior
isdn-layer2-mode
isdn-termination-side
isdn-xfer-cab
local-isdn-rbt-src
oos-behavior
ovrlp-rcving-type
pi-in-rx-disc-msg
pi-to-isdn
play-rbt-to-trk
protocol
pstn-alrt-timeout
rmv-calling-name
trk-xfer-mode-type
For a description of these parameters, refer to the User's Manual.
57
5. VoIP Commands
Description
January 2012