CLI Reference Guide
5.16.8.3 NumberMapIp2Tel
This command defines the NumberMapIp2Tel settings.
Syntax:
gw manipulations NumberMapIp2Tel <index>
set <parameter> <value>
The command's syntax format is described below:
Arguments
<index>
<parameter> <value>
Defaults
NA
Command Modes
Enable
Examples:
The following example enables the source IP address.
(config-voip)# gw manipulations NumberMapIp2Tel 2
(NumberMapIp2Tel-2)# set sourceaddress 12.10.4.120
Version 6.4
Defines the table row index.
Sets the following table parameters:
DestinationPrefix
LeaveFromRight
NumberPlan
NumberType
Prefix2Add
RemoveFromLeft
RemoveFromRight
SourceAddress
SourcePrefix
Suffix2Add
defaults
For a description of these parameters, refer to the User's Manual.
125
5. VoIP Commands
Description
January 2012