Network Interface Configuration; Interface Network-If - AudioCodes Mediant 800 MSBG Cli Reference Manual

CLI Reference Guide
5.2

Network Interface Configuration

5.2.1

interface network-if

This command
Syntax:
The syntax of this command includes the following variations:
interface network-if <index>
set <parameter> <value>
The command syntax format is described below:
Arguments
Sets the following table parameters:
<parameter> <value>
For a description of these parameters, refer to the User's Manual.
Command Modes
Enable
Version 6.4
displays and configures the network interface table.
Application-type
defaults
gateway
Ip-address
mode
name
prefix-length
primary-dns
secondary-dns
underlying-if
vlan-id
Description
65
5. VoIP Commands
Options
control
maintenance
media
media-control
oamp
oamp-control
oamp-media
oamp-media-control
ipv4-manual
ipv6-manual
ipv6-manual-prefix
January 2012