5.9.3
dns Srv2Ip
This command defines the control-network Srv2Ip table.
Syntax:
control-network dns Srv2Ip <index>
set <parameter> <value>
The command's syntax format is described below:
Arguments
<index>
<parameter> <value>
Defaults
NA
Command Modes
Enable
Examples:
The following example defines the First IP address.
(config-voip)# control-network dns Srv2Ip 5
(Srv2Ip-5)# set Port1 10
(Srv2Ip-5)# set ....
CLI Reference Guide
Defines the table row index.
Sets the following table parameters:
Dns1
Dns2
Dns3
InternalDomain
Port1
Port2
Port3
Priority1
Priority2
Priority3
TransportType
Weight1
Weight2
Weight3
defaults
For a description of these parameters, refer to the User's Manual.
84
System and VoIP Functionalities
Description
Document #: LTRT-17940