Tls - AudioCodes Mediant 800 MSBG Cli Reference Manual

CLI Reference Guide
4.12

tls

This command configures Transport Layer Security (TLS).
Syntax:
This configuration set includes the following sub-commands:
analyze
set pkey-size <512 | 768 | 1024 | 2048>
generate <subject-name>
signing-request subject <subject-name>
signing-request interactive
set pkey-passphrase <passphrase>
set require-strict-cert <on | off>
set version <SSL2.0-3.0_and_TLS1.0 | TLS1.0_only>
set client-cipher-string <cipher-string>
set aupd-verify-cert <on | off>
Command
analyze
pkey-size
generate
signing-request
pkey-passphrase
require-strict-cert
version
client-cipher-string
aupd-verify-cert
Command Modes
Enable
Version 6.4
Displays information about the currently-loaded certificate and
private key. These files may be replaced using the "copy"
command at the Enabled mode prompt.
Controls the size (in bits) of the RSA key created by the
"generate" subcommand.
Erases the old private key and certificate; generates a new
random private key and creates a new self-signed certificate.
Creates a Certificate Signing Request (CSR) for use by an
organizational PKI. The "interactive" variant of this command
enters a question-and-answer dialogue for the various fields of
the CSR. In contrast, the "subject" variant of this command
allows specifying just the Common Name (CN) of the
certificate subject.
Configures a short pass-phrase used for decoding loaded
private keys (via the "copy" command).
Enables strict validation of peer certificates received in the
TLS handshake. Strict validation includes the keyUsage
attribute and the authority's allowed depth.
Selects which TLS versions are allowed.
Selects cipher-suites used by the Automatic Update facility.
See the Product Reference Manual for further information.
Enables certificate validation when connecting to remote
HTTPS sites using the Automatic Update facility.
55
4. System Commands
Description
January 2012