5.14
sbc
5.14.1 allowed-coders-group
This command defines the allowed-coders-group.
Syntax:
sbc allowed-coders-group AllowedCodersGroup<0-4> <index>
set <parameter> <value>
The command's syntax format is described below:
Arguments
<index>
<parameter> <value>
Defaults
NA
Command Modes
Enable
Examples:
The following example sets the name in the coder's group.
(config-voip)# sbc allowed-coders-group AllowedCodersGroup0 1
(AllowedCodersGroup0-1)# set name j_brown
CLI Reference Guide
Defines the table row index.
Sets the following table parameters:
Name
defaults
For a description of these parameters, refer to the User's Manual.
102
System and VoIP Functionalities
Description
Document #: LTRT-17940