Access Control - TP-Link TL-WR802N User Manual

Chapter 5 Configure the Router in WISP Mode (Hotspot Mode)
4. Enter 00:11:22:33:44:AA in the MAC Address 1 field.
5. Select Each Week from the Apply To drop-down list, and select Sat. Select 00:00 as
the Start Time and Select 24:00 as the End Time. And then click Add.
6. Enter www.tp-link.com in the Add URL field. Click Add.
7. Click Save.

5. 10. Access Control

Access Control is used to deny or allow specific client devices to access your network
with access time and content restrictions.
I want to:
Deny or allow specific client devices to access my network with access tiem and
content restrictions.
For example, If you want to restrict the internet activities of host with MAC address
00:11:22:33:44:AA on the LAN to access www.tp-link.com only, please follow the steps
below:
How can I do that?
96