TP-Link TL-WR802N User Manual page 24

Chapter 4
• Always On - In this mode, the internet connection will be active all the time.
• Connect on Demand
automatically after a specified inactivity period (Max Idle Time) and be re-
established when you attempt to access the internet again. If you want to keep
your internet connection active all the time, please enter 0 in the
field. Otherwise, enter the number of minutes you want to have elapsed before
your internet access disconnects.
• Connect Manually
immediately. This mode also supports the
on Demand
after a specified inactivity period (Max Idle Time) and not be able to re-establish
when you attempt to access the internet again.
Note:
Sometimes the connection cannot be terminated although you have specified the
applications are visiting the internet continually in the background.
BigPond Cable
If your ISP provides BigPond cable connection, please select
• Username/Password
fields are case-sensitive.
• Auth Server - Enter the authenticating server IP address or host name.
• Auth Domain - Type in the domain suffix server name based on your location.
• MTU(Bytes) - The default MTU size is 1500 bytes. It is not recommended that you
change the default MTU size unless required by your ISP.
- In this mode, the internet connection can be terminated
- You can click
mode. The internet connection can be disconnected automatically
- Enter the username and password provided by your ISP. These
Configure the Router in Wireless Router Mode
Connect/Disconnect
Max Idle Time
BigPond
Max Idle Time
to connect/disconnect
function as Connect
Max Idle Time because some
Cable.
20