TP-Link TL-WR802N User Manual page 77

Chapter 5
• Connect Manually
immediately. This mode also supports the
on Demand
after a specified inactivity period (Max Idle Time) and not be able to re-establish
when you attempt to access the internet again.
Note:
Sometimes the connection cannot be terminated although you have specified the
applications are visiting the internet continually in the background.
PPTP
If your ISP provides PPTP connection, please select PPTP.
• Username/Password
fields are case-sensitive.
• Addressing Type - Choose the addressing type given by your ISP, either Dynamic IP
or Static IP. Click the
button to disconnect immediately.
• MTU(Bytes) - The default MTU size is "1420" bytes, which is usually fine. It is not
recommended that you change the default MTU Size unless required by your ISP.
• Enable IGMP Proxy
multicasting on TCP/IP networks. Some ISPs use IGMP to perform remote configuration
for client devices, such as the modem router. The default value is enabled, and if you
are not sure, please contact your ISP or just leave it.
- You can click
mode. The internet connection can be disconnected automatically
- Enter the username and password provided by your ISP. These
Connect button to connect immediately. Click the
- IGMP (Internet Group Management Protocol) is used to manage
Configure the Router in WISP Mode (Hotspot Mode)
Connect/Disconnect
Max Idle Time
to connect/disconnect
function as Connect
Max Idle Time because some
Disconnect
73