TP-Link TL-WR802N User Manual page 65

Chapter 4
It is strongly recommended that you change the default username and password of the
router, for all users that try to access the router's web-based utility or Quick Setup will
be prompted for the router's username and password.
Note:
The new username and password must not exceed 15 characters and not include any spacing.
3. Click Save.
4. 16. 8. Local Management
This feature allows you to block computers on the LAN from accessing the router by
using the MAC/IP-based authentication.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to System Tools
• Allow all LAN conencted devices to manage the router locally
1. Keep the Available Host (IP/MAC)
manage the router.
2. If you want to access the router via both HTTPS and HTTP, please tick the
checkbox in HTTPS Service
3. Keep the local management port as default if you don't know which port to use.
4. Click Save.
Note:
If the web management port conflicts with the one used for
after the setting is saved.
> Administrator, and focus on the
empty, which means you don't specify any host to
column. Otherwise, keep it disbled.
Configure the Router in Wireless Router Mode
Service Configuration
Virtual Server entry, the entry will be automatically disabled
section.
Enable
61