Chapter 5
•
Enable IGMP Proxy
multicasting on TCP/IP networks. Some ISPs use IGMP to perform remote configuration
for client devices, such as the modem router. The default value is enabled, and if you
are not sure, please contact your ISP or just leave it.
PPPoE
If your ISP provides PPPoE connection, select PPPoE.
•
PPP Username/Password
These fields are case-sensitive.
•
Confirm Password
password you entered is correct.
•
Secondary Connection
an extra connection type, select
connection.
•
Connection Mode
•
Always On
- In this mode, the internet connection will be active all the time.
•
Connect on Demand
automatically after a specified inactivity period (Max Idle Time) and be re-
established when you attempt to access the internet again. If you want to keep
your internet connection active all the time, please enter 0 in the
- IGMP (Internet Group Management Protocol) is used to manage
- Enter the user name and password provided by your ISP.
- Enter the Password provided by your ISP again to ensure the
- It's available only for PPPoE connection. If your ISP provides
Dynamic IP
- In this mode, the internet connection can be terminated
Configure the Router in WISP Mode (Hotspot Mode)
or
Static IP
to activate the secondary
Max Idle Time
70