TP-Link TL-WR802N User Manual page 173

Chapter 8
8. 6. 3. Factory Defaults
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to System Tools
default values.
• Default Username: admin
• Default Password: admin
• Default IP Address: 192.168.0.1
• Default Subnet
8. 6. 4. Backup & Restore
The configuration settings are stored as a configuration file in the router. You can
backup the configuration file in your computer for future use and restore the router to
the previous settings from the backup file when needed.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to System Tools
> Factory Defaults. Click
Mask: 255.255.255.0
> Backup & Restore.
Configure the Router in Client Mode
Restore to reset all settings to the
169