TP-Link TL-WR802N User Manual page 59

Chapter 4
Tunnel 6to4
• WAN Connection
4. 15. 3. IPv6 LAN
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to IPv6 > IPv6 LAN
• Address Auto-Configuration Type
the computers in your LAN. RADVD and DHCPv6 Server are provided. I
• Site Prefix Configuration Type
• Delegated
device will delegate it to the LAN.
• Static - Configure the
contact your ISP to get more information before you configure them.
Note:
If your IPv6 wan connection type is "Tunnel 6to4", the Site Prefix Configuration Type should be "Static" to make
sure "Tunnel 6to4" works properly.
- Display the available wan connection.
and configure the IPv6 LAN settings as needed.
- Select a type to assign IPv6 addresses to
- The type of IPv6 address prefix.
- Get the IPv6 address prefix from the ISP automatically, and the
Site Prefix
Configure the Router in Wireless Router Mode
and Site Prefix Length manually. Please
55