TP-Link TL-WR802N User Manual page 138

Chapter 6
• Secondary DNS Server (Optional)
ISP provides two DNS servers.
Note:
• To use the DHCP server function of the router, you must configure all computers on the LAN as
automatically.
• When you choose Smart IP(DHCP)
as below.
6. 6. 2. DHCP Clients List
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to DHCP > DHCP Clients List
the router.
• Client Name - The name of the DHCP client.
• MAC Address - The MAC address of the DHCP client.
• Assigned IP - The IP address that the outer has allocated to the DHCP client.
• Lease Time - The time of the DHCP client leased. After the dynamic IP address has
expired, a new dynamic IP address will be automatically assigned to the user.
You cannot change any of the values on this page. To update this page and show the
current attached devices, click Refresh.
- Input the IP address of another DNS server if your
in Network > LAN, the DHCP Server function will be disabled. You willsee the page
to view the information of the clients connected to
Configure the Router in Access Point Mode
Obtain an IP Address
134