Inserting The Sensor - Ametek Jofra ETC-125 A Reference Manual

The various design combinations to choose from.
2mm
4mm
Metric - ETC-400 A
3/8 in.
1/8 in.
Imperial - ETC-400 A
Fig. 2
3.4

Inserting the sensor

Before inserting the sensor and switching on the calibrator, please
note the following important warning:
Warning
Never use heat transfer fluids such as silicone, oil, paste,
etc. These fluids may penetrate the calibrator and cause
electrical hazard, damage or create poisonous fumes.
Insert the sensor as shown in Fig. 1, pos. 6.
16
3mm
4mm
6 mm
1/4 in.
1/16 in.
3/16 in.
2019-04-12
1/16 in.
3/16 in.
Imperial - ETC-400 A
8mm
5/16 in.
12.5mm
1/2 in.
ETC-125 A
1/8 in.
5/32 in.
1/4 in.
6mm
1/4 in.
4mm
5/32 in.
123943 08