Inserting The Sensor - Ametek JOFRA ITC-320 A Reference Manual

3.4

Inserting the sensor

Before inserting the sensor and switching on the calibrator, please note
the following important warning:
Warning
•
Never use heat transfer fluids such as silicone, oil,
paste, etc.
These fluids may penetrate the calibrator and cause
damage or create poisonous fumes.
Insert the sensor as shown in Fig. 2.
Fig. 2
In order to spare the sensor and its connections it is recommended to
use a heat protection shield (104216) at high temperatures (see Fig.
3).
16 17-08-2004 123312 03