Control Air Conditioner Power (Energy Saving Ratio [%]); Release Thermo Off (Forced Thermo Off); Confirm The Setting Contents Of Return Back (Return Back); Monitor Demand Control Of Outdoor Unit (Power Peak Cut) - Toshiba BMS-CT1280E Owner's Manual

Touch Screen Controller

Control air conditioner power (Energy saving ratio [%])

An energy saving function whereby you can operate the air conditioner with suppressed cooling/heating power.
Release: Save Mode is not performed.
Max.: Operate with the highest save rate.
50: Operate at 50% save rate.
0: Operate at 0% cooling/heating power (Thermo OFF).
● NOTE
The settings screen is displayed when a compatible air conditioner is in operation.

Release Thermo OFF (Forced Thermo OFF)

"Thermo OFF" refers to an energy saving function that controls demand to restrict the cooling/heating power of the air
conditioner such that the outdoor unit compressor is stopped. When this state is reached, the air conditioner becomes a fan
and cold/hot air is no longer output.
To release Thermo OFF, display the settings screen and press [OK].
● NOTE
Displayed in the case of a compatible air conditioner.

Confirm the setting contents of Return Back (Return Back)

You can check the Return Back setting temperature and the setting time of each operation mode that are set in the operation
schedule.
● NOTE
• Displayed in the case of a compatible air conditioner.
• For information on Return Back, see "Set the details of the operation schedule" (P.45).

Monitor demand control of outdoor unit (Power peak cut)

You can monitor the demand rate [%], outdoor line No., and schedule No. of the outdoor unit connected to the selected air
conditioner.
Display the settings screen to check the demand status of the outdoor unit.
● NOTE
Displayed in the case of a compatible air conditioner.
Owner's Manual
EN
43-