Toshiba BMS-CT1280E Owner's Manual page 47

Touch Screen Controller
Setting Items
Return Back settings [Return Back]
Local operation prohibition setting
[Lock setting of remote control]
(1) (1)
Save operation setting
[Energy saving ratio[%]]
(3) (3)
Ventilation operation setting
[Ventilation -> ON/OFF]
(4) (4)
Vent. Mode [Ventilation -> Mode]
(5) (5)
An energy saving function whereby if you temporarily change the set temperature to
one which increases the load, you can automatically return to the energy saving set
temperature after a certain time has elapsed. For example, if you set COOL to 28°C/
30 minutes, then if the set temperature is set to below 28°C, the Unit will return to
28°C 30 minutes after the change.
● NOTE
Displayed in the case of a compatible air conditioner.
Tap the check box of the function whose setting you want to change to set it to
then select [(1)] or [(2)].
(2) (2)
To enable the setting, set the check box of [(3)] to
conditioner power (Energy saving ratio [%])" (P.43)".
You can turn ON/OFF the operation of the ventilator connected to the air to air heat
exchanger(s) or air conditioner(s). To enable the setting, set the check box of [(4)] to
and apply the setting.
You can set the ventilation mode of the ventilator connected to the air to air heat
exchanger(s) or the air conditioner(s).
To enable the setting, set the check box of [(5)] to
details, see "Set Ventilation Mode (Ventilation → Mode)" (P.41).
Setting Procedure
. For details, see "Control air
and apply the setting. For
Owner's Manual
,
EN
47-