Set The Operation Lock Level (Operation Lock); Set The Ip Address Of The Touch Screen Controller (Ip Address) - Toshiba BMS-CT1280E Owner's Manual

Touch Screen Controller

Set the operation lock level (Operation lock)

1 1
-(2) -(2)
1 1
-(1) -(1)

Set the IP address of the Touch Screen Controller (IP Address)

1 1
-(2) -(2)
(1) (1)
1 1
-(1) -(1)
-EN
62
1
Tap [
2
Enter the password and tap [
● NOTE
The factory default setting password is "1048".
2 2
-(1) -(1)
3
Select the protection level during lock
● NOTE
You can change the password that sets the operation lock.
3
-(1)
Tap [
Enter the changed password, tap [OK], re-enter it on the re-entry screen, then
3 3
-(1) -(1)
tap [OK].
4-digit passwords can be set.
4 4
-(1) -(1)
4
Tap [
1
Tap [
2
Tap the value you want to change
The background of the selected item changes to white.
3
Tap the numeric keypad to enter a number
4
If there are other values you want to change, repeat steps
2
and
5 5
-(1) -(1)
5
Tap [
The IP address is reset.
● NOTE
• The initial setting is as follows:
IP address: 192.168.2.80
Subnet mask: 255.255.255.0
Default gateway: 0.0.0.0
• To return a changed value to the specified value, tap [(1)]. Tap [OK] on the
confirmation screen to reset the IP address.
1 1
-(2)] with [ -(1)] (P.57)
] to display the change password input screen.
4
-(1)]
1 1
-(2)] with [ -(1)] (P.57)
3
5
-(1)]
Owner's Manual
2
-(1)]