Disable The Operation Schedule And Power Peak Cut Schedule (Scheduler Operation); Output Data To A Usb Memory Stick (Output To Usb Memory); [Initial Setting] Menu Settings; How To Display The [Initial Setting] Menu - Toshiba BMS-CT1280E Owner's Manual

Touch Screen Controller

Disable the Operation Schedule and Power peak cut schedule (Scheduler Operation)

You can disable registered Operation Schedules and Power peak cut schedules so that they do not operate.
1
Tap [Scheduler Operation] in the [Functions] menu (P.53)
2
Set the check box to
to operate them, then tap [OK]

Output data to a USB memory stick (Output to USB memory)

You can output monthly report/daily report files for power allocation, alarm files, or setting files to a USB memory stick.
1
Connect the USB memory stick to the slot in the Unit
2
Tap [Output to USB memory] in the [Functions] menu (P.53)
3
Tap [OK]
● NOTE
If the USB memory stick is not connected, [OK] will not be enabled.

[Initial setting] Menu Settings

On the [Initial setting] menu, you can change the Unit screen display and the settings for remote operation, etc.

How to display the [Initial setting] menu

1 1
-(1) -(1)
2 2
-(1) -(1)
3 3
-(1) -(1)
if you do not want to operate each schedule, or set the check box to
1
Tap
1
[ -(1)] appears.
2
Scroll through the menu list and tap [
3
[ -(1)] appears.
3
Tap the item you want to set with [
The settings screen of the selected item appears on the right.
For details on the setting contents of each item, refer to the
following.
• Display Settings (P.58)
• Clock and calendar setting (P.58)
• Icon settings (P.59)
• Theme Settings (P.59)
• User Account Setting (P.60)
• Operation lock Setting (P.62)
• IP Address Setting (P.62)
• Alarm email address setting (P.63)
• Light Setting (P.64)
• Communication Conf. (P.64)
Owner's Manual
2
-(1)]
3
-(1)]
EN
57-