Touch Screen Controller
No.
Name
3
Fan Speed
4
Set temp.
●
NOTE
• For the setting of [(1)], see "Local Remote Controller Lock" (P.37).
• For the setting of [(2)], see "Set Operation Details" (P.39).
• If there is no corresponding function, that item is not displayed.
Example of a model without a flap
Since you cannot set the air direction, it does not change even
if you tap it.
Tap to switch to the following.
●
NOTE
Fan speeds that cannot be set are not displayed.
Tap
to change the set temperature.
●
NOTE
• If the operation mode is FAN, the temperature cannot be set.
• "Control temp." shows the indoor temperature detected by the outdoor unit.
*Depending on conditions such as the installation site of the indoor unit, it may differ from
actual room temperature.
Functions
Example of a model where only a certain fan speed
can be set
(1)
(1)
(2)
(2)
Since you cannot change the fan speed, it does not change
even if you tap it.
Owner's Manual
EN
31-