Check The Output Status Of The Air Conditioner(S) (Power Level); Check The Indoor Temperature Detected By The Outdoor Unit (Outdoor Temp.); Erase Filter Sign (Filter Sign Reset); Set Middle Cool (Soft Cooling) - Toshiba BMS-CT1280E Owner's Manual

Touch Screen Controller

Check the output status of the air conditioner(s) (Power Level)

Check the indoor temperature detected by the outdoor unit (Outdoor temp.)

Erase FILTER Sign (Filter sign reset)

Set Middle COOL (Soft Cooling)

-EN
42
You can check how much power the air conditioner is using for operation.
● NOTE
Displayed in the case of a compatible air conditioner.
You can check the temperature inside the room detected by the outdoor
unit.
● NOTE
Displayed in the case of a compatible air conditioner.
* Depending on conditions such as the location of the indoor unit
installation, it may differ from the actual indoor temperature.
When a device has operated for a certain period of time, a warning
(FILTER Sign) is displayed to indicate that the filter should be cleaned.
After filter cleaning, tap [(1)].
● NOTE
Displayed in the case of a compatible air conditioner.
(1) (1)
If you set the air conditioners where a sign is displayed to [OK], the
cumulative time for the sign display is set to 0.
Middle COOL can be turned ON/OFF. When turned ON, the air direction is
set to up, and the maximum power is restricted.
● NOTE
• Displayed when a configurable model is connected.
• The settings screen is displayed when the air conditioner is in operation
and the operation mode is COOL.
Owner's Manual