Block Write Command (16) - Toshiba TOSVERT VF-FS1 Instruction Manual

5.1.4. Block Write command (16)

Select data, which is desired to be written in block communications, in Block Communication Write
Data 1 and 2 Parameters (
is reset, such as when power is turned off. When the setting is completed, turn off and then on the
power.
No.
0
1
2
3
4
5
6
* When "No selection" is specified in the parameters, no data will be written even though write data
is specified.
■ Computer → Inverter *The text size is 13 bytes fixed.
Inverter Command
No.
10
1) Inverter No. (1 byte)
2) Command (1 byte)
3) Communication No. (2 bytes) : Set in the order of high to low numbers.
4) Number of word (2 bytes)
5) Number of byte (1 bytes)
6) Write data 1(2 bytes)
7) Write data 1(2 bytes)
8) CRC16 (2 bytes)
■ Inverter → Computer (Normal return) *The text size is 8 bytes fixed.
Inverter Command
No.
10
1) Inverter No. (1 byte)
2) Command (1 byte)
3) Communication No. (2 bytes) : Set in the order of high to low numbers.
4) Number of word (2 bytes)
5) CRC16 (2 bytes)
Block Write Data
No selection
Command 1 (FA00)
Command 2 (FA20)
Frequency Command Value (FA01)
Terminal Board Output Data (FA50)
Communication Analog Output (FA51)
Motor speed command (FA13)
Communication number of word
No.
high low high
00
: ---
: Set the block write command (10H fixed).
: 0002H(fixed).
: 04H(fixed).
: Set in the order of high to low write data.
Data to be written to the specified parameter selected by F870.
: Set in the order of high to low write data 2.
: ---
Communication number of word
No.
high low high
00
: ---
: Set the block write command (06H fixed).
: 0002H(fixed).
: ---
, ). This parameter becomes effective when the system
For data details, see:
－
"8.1 Command by communication"
"8.1 Command by communication"
"8.1 Command by communication"
"8.3 Control of input/put signals from com-
munication"
"8.3 Control of input/put signals from com-
munication"
"8.1 Command by communication"
number Write Data 1
of byte
low high
02 04
CRC16
low low high
02
33
E6581393
Write Data 2
low high low
CRC16
low high