5.3. Error codes
In case of the following errors, the return commands from the inverters are added 80h to the com-
mands received by the inverters. The following error codes are used.
Error Code
- Command error
01
- Function code 43 supported but MEI Type not equal to 14
- Communication number error
02
- It tried to write to parameter with only reading.
- Data range error
- Fixed-data error
03
- Function code 43 and MEI Type 14 supported but invalid Read Device ID Code
(ReadDevID code > 3)
- Unable to execute
- Writing in write-disable-during-operation parameter
- Writing in parameter that is executing TYP
04
- Error occurs during writing data.
- It set the run command during main under voltage.
Description
38
E6581393