Operation - ICP DAS USA ET-7H16M Series User Manual

3. Operation

Once connected to the network, the PET-7H16M module can be remotely accessed and configured
through software from anywhere on the network and the sampling data only can be acquired by
software over Ethernet. So far, the device doesn't operate as a stand-along data logger. The only
one connection at a time is allowed to acquire data from PET-7H16M.
There are two different data acquisition modes and several trigger modes of analog input
operation.
The following chart shows the acquisition and trigger modes and their operation frequency of
each combination.
Trigger
Acquisition
Software AD
External CLK AD
Post-Trigger
Pre-Trigger
Tips & Warnings
Maximum 30,000,000 records in N Sample Mode
125 sec (30 KHz), 19.6 sec (200 KHz) of 30,000,000 records in software AD
trigger.
PET-7H16M Series User Manual, version 1.0.1
Continuous
1~30KHz
1~30KHz
-
-
N Sample
1 Hz ~ 200 KHz
-
1 Hz ~ 200 KHz (110KHZ)
1 Hz ~ 200 KHz (110KHZ)
P.30