3.2. N Sample Acquisition
3.2.1.
Software AD Trigger
In N sample acquisition and software AD trigger, Send a start command from PC over the Ethernet
to PET-7H16M to start the AD conversion. The analog input value is continuously acquired and
converted to digital data until the total number of samples reaches. Send a command to get the all
acquisition data over the Ethernet.
The sample rate can range from 1 Hz to 200K Hz.
There are some parameters that need to be specified:
Sampling rate
Scan channels
Sampling Count (Maximum 30,000,000 records)
The trigger mode sets to the software AD trigger.
PET-7H16M Series User Manual, version 1.0.1
P.35