ICP DAS USA ET-7H16M Series User Manual page 17


JP2 Connector
The JP2 connector has 18 pins arranged in 1 row. For more detailed information regarding
the pin assignments of the J2 Connector, please refer to "1.2. Specification"
The pin assignments of the connector are as follows:
Signal Direction
AI0 ~ AI7 Input
AGND -
Trig+
Input
Trig-

Reset Button
The Reset button provides user with a quick
and easy way to resort the default setting.
Press the Reset button continuously for 5
seconds, and then release it. The device will
restore to factory default settings.
PET-7H16M Series User Manual, version 1.0.1
Description
Analog Input channels 0 to 7. For single-ended
measurements, each signal is an Analog Input voltage
channel.
Analog Input Ground. These terminals are reference point
for single-ended AI measurements.
One external trigger(Support for external clock
trigger/digital trigger)
P.17