Ricoh Aficio MP C2030 Operating Instructions Manual page 26

1. Placing Originals
1
1. Sensors
Settings should be made in the following situations:
When placing custom size originals:
See "Custom sizes".
1. Adjust the document guides to the original size.
2. Set the aligned originals face up into the ADF.
Do not stack originals beyond the limit mark.
The first page should be on the top.
1. Limit mark
2. Document guide
• Straighten curls in the originals before placing them on the ADF.
• To prevent multiple sheets from being fed at once, fan the original before placing it on the ADF.
• Set the original squarely.
• p.26 "Custom sizes"
24
BLF003S
BCU003S