Copying Onto Thick Paper - Ricoh Aficio MP C2030 Operating Instructions Manual

1. Open the bypass tray.
Load OHP transparencies one by one to prevent them jamming.
2. Insert the paper face down until you hear the beep.
3. Align the paper guides to the paper size.
4. Press the [ ] key.
5. Select [Paper Type] using [ ] or [ ], and then press the [OK] key.
6. Select [OHP (Transparency)] or [Thin Paper] using [ ] or [ ], and then press the [OK] key.
7. Select the paper size.
8. Place the originals, and then press the [Start] key.
9. When the copy job is finished, press the [Clear Modes] key to clear the settings.
• Printing on special paper such as OHP transparencies and thin paper may be slower than printing on
plain paper.
• To prevent multiple sheets from being fed at once, fan paper before placing it on the tray.

Copying onto Thick Paper

When copying onto thick paper, select the type and size of paper.
1. Open the bypass tray.
2. Insert the paper face down until you hear the beep.
3. Align the paper guides to the paper size.
4. Press the [ ] key.
Copying from the Bypass Tray
2
35