Maintenance - Roland Double Sheet Detector I100 Manual

For double sided sensors

Table of Contents

B0003308 / 1.4 /

13.02.2013

Maintenance

Pos: 37 /Doppelblech/Geräte/R1002/10 Wartung/Allgemein I100 @ 0\mod_1185176611484_501.doc @ 4283 @

During operation, chips and metal particles can accumulate at the sensors. Thus the sensors must

be cleaned from time to time.

During operation, the sensors do not touch the sheets, so normally there will be no wearing to the

sensors. If, however, the sensors are exposed to mechanical strain for any reason (abrasion,

damage of sensor face), they must be replaced if the sensor faces begin to show small punctures.

A pair of sensors and a sensor cable should be kept on stock as spare parts.

When ordering spare parts, always state the serial number, the order information and the part

number (if available).

Pos: 38 /Kapitelübersicht/12. Bestelldaten @ 0\mod_1121422152468_501.doc @ 516 @

ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33

Manual

Double Sheet Detector R100 I100

for pairs of sensors

Maintenance

Table of Contents

Double sheet detector r100