Parts Inventory; Floor Stand (Rt-Stf) - SawStop RT-PHFS Owner's Manual

PARTS INVENTORY

Some products are shipped partially assembled. Please unpack the parts carefully and
confirm you have received each item on the lists below.
IF YOU CANNOT FIND AN ITEM ON THIS LIST, CHECK THE MOUNTING
LOCATIONS OR EXAMINE THE PACKAGING MATERIALS VERY CAREFULLY.
CERTAIN COMPONENTS MAY HAVE BEEN PRE-INSTALLED FOR SHIPPING
PURPOSES.
Floor Stand for Router Tables (RT-STF)
A.
Lower Front/Rear Bracket (2)
B.
Lower Side Bracket (2)
C.
Caster Mounting Bracket (1)
D.
Upper Front/Rear Bracket (2)
E.
Upper Side Bracket (2)
F.
Stand Leg (4)
G.
Floor Stand Switchbox Mounting
Bracket Assembly with Power Cord (1)
I.
Caster Assembly with Table Bracket
Support Plate (1)
M.
Leveling Foot (4)
O.
Wheel Housing (2)
P.
3" Wheel (2)
Pre-Installed:
H.
M5 x 0.8 x 45 Pan Head
Phillips Screw (2)
K.
M6 x 16 x 2 Washer (1)
L.
M6 x 1.0 x 16 Socket Head
Cap Screw (1)
N.
M10 x 1.5 Hex Nut (4)
Y.
M6 x 1.0 Hex Nut (1)
3
RT-FS/RT-PHFS OWNER'S MANUAL
Hardware Pack:
J. M8 x 1.25 Lock Nut (2)
M6 x 16 x 2 Washer (55)
K.
L. M6 x 1.0 x 16 Socket Head
Cap Screw (14)
Q. M8 x 1.25 x 50 Hex Head Bolt (2)
M6 x 1.0 x 12 Socket Head
R.
Cap Screw (5)
M8 x 19 x 1.5 Washer (6)
S.
T. Handle Mounting Bracket (1)
U. M6 Lock Washer (14)
V. M6 x 1.0 x 12 Hex Head Bolt (36)
W. M4 x 0.7 Hex Nut (4)
X. M4 x 0.7 x 20 Pan Head
Phillips Screw (2)
PAGES:
3-8