SawStop RT-PHFS Owner's Manual page 2

Copyright SawStop, LLC
All Rights Reserved
1st printing, January 2018
Updates of this manual may be
available at www.sawstop.com
The Standalone Router Table Assembly shown on the front cover is the cast iron model
RT-FS. The Four-Post Router Lift with Lock, Downdraft Dust Collection Box for Router Lift,
Flip Stop for Router Fence and Single Vertical Feather Board for Router Tables are installed.
These are optional accessories that does not come included with your
Standalone Router Table. Your setup may look different.
SawStop, the SawStop blade logo, and the configuration of this product are either registered
trademarks or trademarks of SawStop, LLC. Software copyright by
SawStop, LLC. All rights reserved.