SawStop RT-PHFS Owner's Manual page 34

Slide the 19mm lock knob nuts (4.24)
18
into the T-slots in the top of the 32" table
rails (4.18), then slide the router table
fence forward. Use the fence lock knobs
(4.2) to secure the router table fence in
place.
If you have a Downdraft Dust Collection Box (RT-DCB) installed, use the provided
19
dust hose and hose clamps to secure the 2 ½" dust hose to the router table fence
to the dust port splitter on the dust box. Further information can be found in your
Four-Post Router Lift with Lock manual, which includes information about the dust
box as well. Copies of your manuals can be downloaded at www.sawstop.com.
Otherwise, use a 2 ½" dust hose (not provided) and two dust hose clamps (not
provided) to attach the 2 ½" dust port on the router table fence directly to a dust
collection system.
i
If there is excess dust hose length between the 32" fence and the dust box, you can shorten
the dust hose.
29
RT-FS/RT-PHFS OWNER'S MANUAL
4.2
4.18
4.24