SawStop RT-PHFS Owner's Manual page 13

i
Important Part Identification Note:
Throughout the manual, the exploded views are referenced to clarify the location and
name of each part. There are multiple exploded views in this manual, so a
decimal point system is used. The number before the decimal point refers to the
exploded view number (in this case, 1 through 4). The number after the decimal point
refers to the part number (as indicated by the number in the balloon in the exploded
view). For example, a part referenced as "1.1" would be the part labeled with a "1"
balloon in the exploded view #1.
•
Exploded View #1: Floor Stand for Router Tables – See page 33
•
Exploded View #2: 32" x 24" Cast Iron Router Table – See page 35
•
Exploded View #3: 32" x 24" Phenolic Router Table – See page 37
•
Exploded View #4: 32" Fence Assembly for Router Tables – See page 39
RT-FS/RT-PHFS OWNER'S MANUAL
8